Truck turning assistance system with 10" monitor

ICA-Turn Assist AAS Set 1.2

BMVI-compliant cornering assistant with ABE. Eligible version.

request product find a merchant

  • Turn assist (10" monitor) with ABE - BMVI compliant

    Collisions between commercial vehicles and cyclists and pedestrians are among the most serious accidents, especially for the more vulnerable road users. Around 60 per cent of all serious truck-bicycle accidents could be avoided by turning assistance systems, according to calculations by the German Insurers' Accident Research Association (UDV) based on its accident database.
    AXION offers two versions of the turn-off assistance system in accordance with the requirements for turn-off assistants set by the Federal Ministry of Transport and Digital Infrastructure (BMVI).

    Our tried-and-tested ICA sets are now also available with a 10-inch monitor.

    • Turn assistance system AXION ICA-Turn Assist AAS Set 1.2 with 10" monitor
    • AXION ICA-Turn Assist AAS Set 2.2 with 10" monitor and steering angle sensor

    Thanks to the extension of the general operating licence (ABE) by the Federal Motor Transport Authority (KBA), funding is now also possible for the AXION ICA-Turn Assist cornering assistance systems with 10-inch monitor.

    The ABE was issued irrespective of the vehicle type, but the following area of application is defined:
    Class N2 and N3 commercial vehicles and buses and coaches (M2 & M3) with more than 9 seats including the driver's seat, which fulfil the following installation conditions. The system must be completely installed on the vehicle in which the driver receives the warning.

    • The camera must be positioned within the distance of min. 0.2 m - max. 6.0 m from the front edge of the vehicle.
    • The minimum mounting height is 2.0 m.
    • The maximum mounting height is 4.0 m.
    • Further details are described in the instructions.

    The cornering assistance system (AAS) is a camera-based system consisting of a side camera for observing the monitored area, a monitor for displaying the camera image and an ECU (control unit), which analyses the information in the camera image using an intelligent software algorithm and triggers a warning in the event of defined dangerous incidents.

    How it works:
    The camera of the ICA system detects the area next to the vehicle and monitors an area next to the vehicle defined during installation when turning.
    The ICA-Turn Assist system uses a software-based algorithm to detect movements in this area that are classified as dangerous and warns the driver both visually and acoustically by changing the colour of the monitoring area on the 10-inch monitor from green
    to red, and acoustically via the buzzer included in the scope of delivery.

    The system is permanently active at least within the recommended speed range of 0-30 km/h.

    The system also has an input for a reversing camera, which can be used as an option. If no reversing camera is used with the system, the ICA Turn Assist side camera can also be displayed when manoeuvring in reverse.

    There is also the option of using the ICA-WLED, a warning LED, to provide the driver with an additional warning. We recommend this as an accessory.

    ICA-Turn Assist AAS Set1.2 consists of:

    • ICA-Control-Box
    • 1 x front/side camera
    • 10m camera cable
    • CRV 1010 monitor

    Optional accessories:

    ICA-WLED LED warning indicator for mounting on the A-pillar
    AVS controller Control unit for adjusting the system during installation
    Rear view camera Various AXION models possible

  • ICA-B2CH Control Box:

    Video input 2
    Video output 1
    Video output format PAL/NTSC(Auto)
    Power supply 12/24 V
    Power consumption <15W
    Operating temperature -40°C to + 85° C
    Protection class IP68
    Dimensions 170(L) x 120(W)x40(H)mm
    Weight 497 g

     

    DBC 1140202B (150°) Camera:

    Image 1/4 " colour CCD
    Resolution(pixel) PAL:752(H)*582(V)
    Lens 150° (horizontal) 1.61mm, F2.5
    9 LEDs for night vision >8m
    Horizontal resolution 600 TV lines
    Protection class IP 68
    Synchronisation Internal synchronisation
    Signal-to-noise ratio >46dB(AGC off)
    Power supply DC12 V
    Power consumption <2.5 W
    Operating temperature -30°C to + 70° C
    Storage temperature -40°C to + 80° C
    Dimensions 85(L)*78(W)*97(D)MM
    weight 235 g

     

    CRV 1010 Monitor:

    Screen diagonal 10.1 inch
    resolution 1024 x 600
    Screen brightness 450 cd/m2
    Image reflection Yes
    Picture standard PAL / NTSC
    Day/night switching Yes, sensor
    Loudspeaker Yes
    Camera input 2x AXION Mini-Din
    Power supply 10-30 V
    Power consumption <7W
    Operating temperature -20 °C to + 70 °C
    OSD (operating menu) 7 languages
    Dimensions (LxWxH) 255x183x42 mm
    Weight approx. 720 g
    Test marks, certificates ECE-R10

  • ICA-Turn Assist Flyer

    Download

    ABE ICA Turn Assist AAS

    Download

    AXION ICA Turn Assist Zubehör Flyer

    ICA Turn Assist Zubehör Flyer für AXION Abbiegeassistenten

    Download
Technical changes and errors excepted.

optional accessories

optional accessories

AXION ICA Turn Assist solutions help prevent accidents

Traffic situations where an AXION Turning Assistant can support you

When turning right

The cyclist rides on the carriageway next to the truck at a distance of 0-2 m

When passing

The truck overtakes a cyclist and sees in the camera the situation next to the vehicle.

When changing lanes

The truck wants to change lanes and other vehicles thread in from behind.

When turning right

The cyclist rides on a cycle path beside the road at a distance of 2-5 m

When turning right

The cyclist rides on a cycle path next to the road at a distance of 2-5 m. Visibility is partially obscured by parked vehicles.